If you have more than one zone, then you may need to install the magnetic tags in each zone. It allows the robotic mower move from zone 1 to zone 2. If there are more than two working areas, you will need a pair of additional tags.
1. Make sure that the distance between area 1 and area 2 (L) does not exceed 5 m. Make sure that the width of the pathway (W) is greater than half of distance between area 1 and area 2 and there are no obstacles in the pathway.
Make sure that there are no obstacles within a radius of 1.5 m around the tags.
Make sure that the height of the pathway (h) is less than 3 cm.
2. Install the tag 30±5cm away from the boundary. Use two screws to fix the tags.Put the other tag in another zone and make sure that the arrow marks on the magnetic tags are pointing towards each other and symmetrical.
3. Magnetic tag can't be used at the boundary set by magnetic stripe